-
LOWCELL ST Ultra-thin polypropylene(PP)foam board 0.5-1.0mm
Lowcell ST is a supercritical non-crosslinked continuous extrusion ultra-thin foamed polypropylene board with a closed-cell independent bubble structure. It has a 2x foaming ratio, a density of 0.6g/cm³, and is available in thickness specifications ranging from 0.5 to 1.0mm. As a high-performance protective material that combines multiple excellent properties, the ultra-thin PP foamed board is suitable for various electronic devices and precision instruments.
-
LOWCELL 3 times polypropylene(PP) foam board filter machine splint disc 2mm/2.5mm
Lowcell is a supercritical non-crosslinked continuously extruded foamed polypropylene board with a closed-cell independent cell structure. The foaming ratio is 3 times, the density is 0.35-0.45g/cm3, and different thicknesses of 2-5mm are available according to the use occasion. Because of its excellent waterproof, mildew-proof, corrosion resistance and easy cleaning, its service life can reach at least 3 years. This PP foam plate filter splint disc is designed to meet the requirements of environments with high filtration requirements. It is made of PP foam board material, which can ensure that the product will not shed debris during use, thereby avoiding contamination of the product. This lightweight material makes the plywood more convenient to carry and install, improving the convenience of use of the product. In addition to being lightweight, non-shedding, and impact-resistant, this plywood disc is also non-toxic and harmless. After multiple tests, it has been confirmed that it will not cause any harm to the environment and the human body. It is a very Safe material. When you use this product, you don’t have to worry about negative impacts on the environment and the product itself, and you can use it with confidence
-
LOWCELL O polyethylene(PE)foam board 5mm/7mm/10mm/12mm
Lowcell O is a supercritical non crosslinking extruded foamed high-density polyethylene sheet with independent bubble structure. The foaming ratio is 2 times, the density is 0.45-0.55g/cm3, and the thickness is 5mm/7mm/10mm/12mm. It is a polyolefin foaming material with nearly perfect performance. Compared with polypropylene sheet with the same foaming ratio, foamed high-density polyethylene has higher strength and hardness, which makes it have better rigidity and compression resistance. At the same time, compared with other traditional materials, it also has a certain degree of lightweight and buffer protection. The higher density makes it have better nail-holding ability, and it will be more durable if screw connection processing is required. At the same time, compared with polypropylene, polyethylene has superior weather resistance and low temperature resistance, which is suitable for more extensive outdoor or low-temperature applications.
-
LOWCELL polypropylene(PP) foam board automotive flooring 9.0-10.0mm
Lowcell is a supercritical non-crosslinked extruded polypropylene foam board with closed-cell independent air bubbles. The product has a foaming ratio of 2x, a density of 0.5-0.6 g/cm³, and a thickness of 9-10 mm, making it a high-performance, thick polypropylene foam board. In the field of modern transportation manufacturing, material selection is a crucial step in vehicle development, and flooring places stringent requirements on the substrate. We have specifically developed this three-layer polypropylene foam board for automotive flooring applications, making it widely compatible with various vehicle types, including vans, minivans, and electric tricycles. Utilizing a unique foaming structure design, this board achieves lightweight design while maintaining excellent cushioning and pressure resistance, as well as waterproofing and chemical corrosion resistance. Whether facing extreme weather conditions or long-term daily wear and tear, it reliably protects the safety of cargo inside the vehicle, contributing to improved overall vehicle durability and extended vehicle lifespan.
-
LOWCELL Protective backing board of liquid crystal glass
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 3 times, the density is 0.35-0.45g/cm3, and the thickness specification varies from 3mm、 5mm and 10mm according to the application occasion. It can be used as the core material and surface protective backing board of multi-layer composite buffer material for high demand packaging pallets of liquid crystal glass semi-finished products and finished products.
-
LOWCELL polypropylene (PP) foam board blister trays
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure.The foaming rate is 3 times, and density is 0.4-0.45g/cm3.The thickness specification 3-5mm, different thickness for selection. Compared with the traditional solid polyethylene blister tray, it has many obvious advantages.
-
LOWCELL Trolley case
The trolley case is suggested to be made with LOWCELL H material.Relying on own advanced material technology and years of experience in supplying materials for well-known trolley case processing manufacturers at home and abroad, our company has independently developed retro trolley case products. Exclusive selection of new nano polymer polyolefin composites, commonly known as alloy leather. This material is moisture-proof, mildew proof and anti-corrosion. It does not contain plasticizer, formaldehyde, toluene and other harmful substances. It has no VOC emission, light weight and environmental protection. It is a new non-toxic recyclable material.
-
LOWCELL U polypropylene(PP) foam borad for radome
Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.
-
LOWCELL polypropylene(PP) foam board profile 5.0mm
Lowcell is a supercritical non-crosslinked continuous extruded foamed polypropylene sheet with closed-cell independent cell structure. 3 times the expansion ratio, the density is 0.35-0.45g/cm3, and the thickness specification varies from 3, 5, and 10mm according to the application occasion. It can be made into various turnover boxes and compartment materials, etc., and containers used for transportation and storage of products, etc. The production process of PP foam board is simple, and it can be cut into various shapes and sizes according to needs. This makes it very suitable for making the borders and inner partitions of turnover boxes, etc. Compared with traditional wood or metal materials, PP foam board is more durable and environmentally friendly. It is not easy to rust, rot or moisture, and can effectively resist the corrosion of chemicals. Not only is it able to withstand heavy loads and stacking pressure, but it also needs to protect the loaded items from bumps and damage. PP foam board also has good flame retardancy, which can effectively prevent the occurrence and spread of fire, which provides a higher safety guarantee for the use of turnover boxes. In order to meet these needs, PP foam sheets are widely used in various industries.
-
LOWCELL T polypropylene(PP) foam borad for 5G radome
Lowcell T is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density 0.45-0.5g/cm3 and thickness is 1mm. At the same time, our boards also have different thicknesses of 1-10mm to choose from. It is the best choice of inner core material for the new 5g communication radome to reduce weight and cost. While reducing the weight of radome and material and transportation cost, polypropylene has its own low dielectric constant and does not affect the transmission of communication signal.
-
LOWCELL polypropylene(PP) foam board cover plate 10.0mm
Lowcell is a supercritical non-crosslinked extruded foamed polypropylene sheet with closed-cell independent cell structure. 2 times the expansion ratio, density 0.45-0.5g/cm3, thickness 10mm. It is an ultra-thick polypropylene foam board with near-perfect performance. Compared with polypropylene board with the same expansion ratio, foamed high-density polypropylene has higher strength and hardness, making it have better rigidity and compression resistance. We live in a dusty environment. Dust is everywhere and can accumulate inside the equipment, or in the turnover boxes of the parts production workshop, etc., negatively affecting its performance and lifespan. In order to solve this problem, we developed this 10mm PP foam board cover, which is a very simple and effective protection measure to isolate dust and dirt from the outside world. You can use our products with confidence.
-
LOWCELL H protective polypropylene(PP)foam sheet
Lowcell H is a supercritical SCF non-crosslinked extruded foamed polypropylene(PP) or Polyethylene(PE) board with independent bubble structure.1.3 times foaming rate, density is 0.6-0.67g/cm3. It is made by CO extrusion and has a special three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface pressed leather lines have the effect of skid resistance. The middle layer is black low expanded foam, it not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
